Zhong Yi FRP factory is the member of Chinese FRP industry association. It is a science and technology company that is specially engaged in the FRP equipments development and production. Early from the establishment, the company set up the policy of high tech, high initial position, high standard and had a scientific research troop constituted by the professional talented person of aspects, such as microcomputer, electronics and machine etc. They have been carrying on the development and research of the new equipments constantly. The company also has a marketing troop who is in the prime of their life, professional and be good at the marketing to promote sales with the technique. By the effort of employee's last few years, constantly creation, absorbing the advantage of import equipments, the new generation FRP coiler was developed. And it has the following characteristics:
The core parts of AC servosystem adopt the product of PANASONIC in Japan and raise the dependability of the equipments consumedly; The microcomputer control system adopts the product of Yanhua in Taiwan and further strengthen the system credibility.
The software part is provided with great innovation. "zero drift" problem is overcome. This coiler software has already satisfied to produce the militant product currently;
The mixing sand craft have two kinds of functions of positive sand inclusion and inverse sand inclusion at same time and can satisfy the request of different customer.
Currently the equipments my company produce sell to Szechwan, Shannxi, Henan, Jilin, Shandong, Heilongjiang, Xinjiang, Hebei, Hunan, Hubei, Liaoning, Jiangsu and other places and obtained good prestige." Zhong Yi" will be the supporter of the wide consumer's success with the top-grade quantity, the top-grade after-sales service. 
The company's main product contains:
1 The FW-10000 types of microcontrolled field coiler: That product mainly used for producing the big diameter, large tank inconvenient in transport.
Its main technique index is as follows:
?The biggest winding diameter: 10000 mm ?the biggest winding length:12000mm
?the biggest width of the yarn slice: 200 mm ?the range of winding angle:45°~90 °
?Total capacity of equipments: 25KW
2 the FW-4000 types of microcontrolled coiler: That equipment mainly used for producing 4 meters of diameter, 12 meters length, the FRP tank and pipe with arbitrarily diameter and length less than 150 cubic meter in capacity.
Its main technique index is as follows:
?The biggest winding diameter: 10000 mm ?the biggest winding length:12000mm
?the biggest width of the yarn slice: 200 mm ?the range of winding angle:45°~90 °
?Total capacity of equipments: 13KW
3 the FW-2500 types of microcontrolled coiler: That equipment mainly used for producing 2.5 meters of diameter, arbitrarily diameter and length of the tank and pipe with the length less than 12 meters. It is convenient to be used by small company.
Its main technique index is as follows:
?The biggest winding diameter: 2500 mm ?the biggest winding length:12000mm
?the biggest width of the yarn slice: 200 mm ?the range of winding angle:45°~90 °
?Total capacity of equipments: 8KW
4 the FW-800 types of microcontrolled piping production line: That equipments suits for producing the FRP pipeline less than ? 800 mm. The product line is generally constituted by five kind of equipment: sark-making machine (1), coiler (1), curing station(2), finisher machine(1), strip machine(1).
Its main technique index is as follows:
?The biggest winding diameter: 800 mm ?the biggest winding length:12000mm
?the biggest width of the yarn slice: 200 mm ?the range of winding angle:45°~90 °
?Total capacity of equipments: 40KW
5 the FW-400 types of microcontrolled coiler: That equipment are used for wind FRP pipeline less than 400mm and the small scaled tank less than 400mm generally.
Its main technique index is as follows:
?The biggest winding diameter: 400 mm ?the biggest winding length:6000mm
?the biggest width of the yarn slice: 100 mm ?the range of winding angle:45°~90 °
?Total capacity of equipments: 4.5KW
6 four( six) mandrel FRP pipeline coiler set: According to the production process of the FRP, a few time segments of sark-making, winding, consolidation, stripping etc. is being carried on time-shared by making use of the project control on a circumference to promote theproduct efficiency.
Its main technique index is as follows:
MT4 MT6
The mandrel number: 4 6
the diameter of product: 200~800mm 50~250mm
the length of the product: 12000mm 6000mm
the range of winding angle: 45°~90° 45°~90°
the width of yarn slice: 200mm 200mm
the total capacity of machine set: 12KW 8KW
7 Finisher machine: according to the installation character of FRP pipeline, we designed and developed XZ-800 type,XZ-250 type FRP pipeline finisher machine to support the MT4,MT6. This machine can carry through fixed-length cut, grinding and socket, and bonding interface.Main parameter is as follows:
Types XZ-800 Types XZ-250
The diameter of finisher product: 200~800mm 50~250mm
The length of finisher product: 12000mm 6000mm
Total power: 10KW 6KW
Grinding speed: 20m/s 20m/s
8 Sand inclusion piping production line: Mainly used for the production of FRP pipeline with sand inclusion.
The production line generally constituted by eight working positions: the sark-making machine (1), coiler(1), curing station(2), finisher machine(1) and strip machine(1) etc. there are the following two kinds of model numbers.
1. The FWJS-3000s types of microcontrolled piping production line with sand inclusion.
Main technique index:
Piping diameter: 400~3000mm Piping length: 12000mm
Total capacity of equipments: 140KW floor area: 15m×60m
The width of yarn slice: 220mm |
